Description
The effectiveness of raw edge cogged belts is evident where the pulley diameters are extremely small, belt speed requirement is high, high levels of power transmissions are required, operating temperatures are quite high, Usage of wrapped construction belts is rendered expensive proposition and impractical. Raw edge belts are best suited for such conditions because of the usage of high-grade components that go into the manufacturing of these belts.
Our MITSUSTAR production range of Automotive sections for both types are; AVX10, AVX13, AVX15, AVX17, AVX22, 15, 17, 22, 24, 28, 30, 32.
Detailed Description:
Black: Cover fabric
Cushion layer: the adhesive polychloroprene-rubber compound or EPDM rubber compound.
Tension cord: low-stretch polyester cord.
Gear tooth core: Polychloroprene-rubber compound with transverse textile fibers.
Fabric: Sheer strength polyamide.
Product Benefits:
High efficiency
High level of durability
Low-maintenance operation
Very smooth running
Excellent tension behavior
Features:
The characteristics of the MITSUSTAR make its use especially cost-effective requiring low maintenance. Any mechatronic engineer would be enthused by its smooth running, even in the case of small pulley diameters for propelling alternators, water pumps, air conditioning compressors, or power steering.
Teeth Profile:
|
Section |
Top Width(mm) |
Height(mm) |
Length Range(mm) |
|
AVX10 |
10 |
8 |
500-6000 |
|
AVX13 |
13 |
9 |
500-6000 |
|
AVX15 |
15 |
9 |
500-6000 |
|
AVX17 |
17 |
11 |
500-6000 |
|
AVX22 |
22 |
13 |
500-6000 |
|
15 |
15/32" |
5/16" |
20"-195" |
|
17 |
17/32" |
11/32" |
25"-195" |
|
22 |
22/32" |
7/16" |
30"-195" |
|
28 |
28/32" |
9/16" |
35"-195" |
Marking:
